Ameca SA
Ameca SA

Hand-operated installation tool

DRILLING
The hole is drilled using a commercially available stand drill bit.
TAPPING
The AMECOIL taps can be used by hand or by machine.
Taper tap
Entry on 4 leads.
For through holes and blind holes.
Can be used on all metals and for high precision tapping.
Plug tap
Entry on 2 leads.
For through holes and blind holes.
Tapping by hand or by machine.
Straight groove machine tap with "GUN cut" entry
Entry on 4 leads.
For through holes.
The "GUN" cut drives the chips out on the other side.
Machine tap for 35° to 39° right-hand helical grooves
Entry on 2 to 3 leads. For blind holes.
For all materials which are difficult to machine.
Special taps on request.
Inspection stamp
Allows checking the tap which must be fitted with an AMECOIL thread insert.
INSTALLATION
Conventional series

Multiple-dimension with smooth pin

Multiple-dimension with threaded pin

Single-dimension with smooth or threaded pin body

Single-dimension with mandrel

AMECOIL SR series

Single-dimension with threaded pin and handle

Single-dimension with threaded pin and knob

ACCESSORIES
Break punches
They are used to break the thread drive pin. Hand operated or automatic models available.
  Extractor
AMECOIL extractors are used to remove thread inserts which are incorrectly laid.
Kits

Multiple-dimension

Single-dimension

Spark plug kits

Minikit

Minikit